factory test

英 [ˈfæktri test] 美 [ˈfæktri test]

(发动机)工厂试车;工厂试验

机械



双语例句

  1. Prior to the factory test the supplier shall submit detailed plan for system equipment tests including testing items, methods, technical targets and relevant specifications for implementation upon approval by the purchaser.
    工厂测试前,卖方应提供系统设备测试的详细计划,包括测试项目、测试方法、指标及相关规程,并由买方确认同意后方可执行。
  2. The manufacturer of all PVC or CPVC bleach ball valves must complete all components prior to the factory assembly, test, and packaging of those valves.
    所有PVC或CPVC漂白剂球阀的制造商必须在进行工厂组装、测试和阀门包装之前全部完成所有的部件的生产。
  3. Each safety relief valve shall pass a factory test.
    所有安全泄压阀均应通过工厂试验。
  4. The bidder shall submit to the tenderee the factory test report, the type report of relevant equipment as well as the operation and testing instructions of the equipment according to the requirements of the specifications.
    投标者应按本规格书的要求,向招标者提供工厂试验报告,有关设备的型式试验报告,同时提供设备的使用和测试说明书。
  5. The masts will be packed and loaded after the factory acceptance test in the factory onto a lorry or train, depends on the location where the factory are and the destination store will be.
    根据工厂所在地和储存地点,在工厂验收试验试验后将支柱装箱于货车或火车。
  6. Each completed and assembled motor shall receive a routine factory test.
    每一台装配完好的电机都应该接受常规的工厂测试。
  7. Following the completion of the integrated system checkout, supplier shall demonstrate the system to company at a factory acceptance test.
    综合系统测试完成之后,供应商应在工厂验收测试时向公司演示该系统。
  8. Per factory, test reports will be ready late today.
    每个工厂,测试报告将于今天晚些时候准备。
  9. It is advanced equipment of communication cable factory test and repair core wire, pair twisting wire at present.
    是目前通讯电缆厂检测和修理芯线、绞对线的先进设备。
  10. The outcome has to be stated in a factory test certificate, which shall include the necessary material certificate.
    结果须在工厂试验证书中给出,其应包括必要的材料证明。
  11. Our products through most of Europe and America UL, CE, suppliers have passed the ISO quality system authentication, all products are100% qualified factory test.
    我们的产品大部分通过欧美UL,CE认证,供应商均通过了ISO质量体系认证,所有产品出厂时均100%测试合格。
  12. Study on Capacity Improvement of Semiconductor Assembly and Test Factory Test& Measurement
    半导体集成电路封装测试工厂生产能力提升研究
  13. Factory test shows that the new hydraulic wheeled tractor hoist is improved greatly in operation performance and economical efficiency.
    厂内试验表明,新型液压轮式通井机在作业性能、经济性和操作等方面均有较大改善。
  14. Transformer's DC resistance measurement is one of the primary item before transformer leaving factory and precautionary test. The inherent time constant of transformer is quite long, so it is very important to study how to shorten the measuring time.
    电力变压器直流电阻测量是变压器出厂及预防性试验的主要项目之一,但电力变压器固有的时间常数较大,研究缩短电力变压器直流电阻的测量时间具有重要意义。
  15. The engine vibration characteristics were analyzed for an aero-engine that exhibited large engine vibration in the factory test.
    对某型某台份发动机在出厂试车时出现的整机振动大的故障现象,进行了振动特征分析;
  16. Determination of ellipse envelopes in ex factory test of pump CAT
    泵CAT出厂试验中椭圆包络线的确定方法
  17. This paper introduces a microcomputer based automatic testing system for factory test of AC machines.
    本文介绍了一套适用于工厂交流电机试验的微机自动化测试系统。
  18. The factory acceptance test ( FAT) and site acceptance test ( SAT) of distribution automation system should be done before system putting into operation in order to ensure the product's quality. Especially, feeder automation ( FA) testing is the key process.
    为保证配电自动化产品在用户验收阶段的产品质量,需要进行出厂试验(FAT)与现场试验(SAT),其中,馈线自动化测试是配电自动化系统试验的关键。
  19. This article, using well-fitted Monte Carlo data produced by confirmatory factor analysis, intends to inspect the limitation of exploratory factory analysis in test construction.
    本文主要用模拟研究的方法,通过生成拟合优度验证性因素分析的数据,来考察探索性因素分析在测验编制中的局限性。
  20. The calculation results are in agreement with that of ex factory stress test of the launching pad.
    其计算结果与发射台出厂应力测试试验结果比较相当一致。
  21. After trial and error, the model system has been used in factory test and the better results have been achieved.
    经试验后,在线材生产厂投入试运行,取得了好的效果。
  22. Applications of French wheat flours in Chinese noodles(ⅲ)& factory scale making test
    用法国小麦粉制作中国面条的研究Ⅲ.工业化生产试验
  23. Factory Performance Test Method of Centrifugal Refrigeration Unit with Excessive Fouling
    高污垢离心制冷机组的工厂性能试验方法
  24. This comprehensive test platform can be widely used in testing of the hydraulic pump, motor and multi-way valve before installation, during system or hydraulic components maintaining. Also it can provide experimental support for the products design and factory test.
    可以广泛应用于液压泵、马达和多路阀的装机前、系统维修和液压元件维修后测试,也可以为产品设计和出厂测试提供实验支持。
  25. The analog pointer measuring instruments are mostly used in turbocharger test in domestic factory and test data is read and calculated in artificial means.
    大多仍然采用指针式仪表,通过人工方式读取试验数据并且进行计算。
  26. Winding DC resistance measurement, as one of the major programs of power transformer factory preventive test, is the most direct way to acquire a series of performance parameters of power transformers rapidly.
    绕组直流电阻测量是电力变压器出厂及预防性试验的主要项目之一,是迅速获取电力变压器众多性能参数的最直接办法。
  27. The two improvements are realized in the final factory test.
    两点改进都在工厂的大试中得以实现。
  28. The Intelligent Closestool control system is through the production of the factory test. Results were very good and stable operation, meet their needs.
    智能坐便器控制系统经过生产厂方的测试,效果良好,运行稳定,能够达到他们需求。
  29. At present GIS requires to do the PD test in the type test 、 factory test and field test.
    目前GIS的型式试验、出厂试验和现场交接试验都要求进行局部放电试验。